Best Working Hacking WiFi Passwords Trick

Everyone wants a new Hacking Wi-Fi Hacker to hack passwords for their android phone. Now in this post we collect some of best 100% working android apps which helps you to bypass any WiFi.

Also see how to work with this hacking WiFi passwords apps.

Best Working Hacking WiFi Password App

  • Bcmon Android App
  • Reaver Android App

 

Hacking WiFi Passwords with Bcmon Android app using WEP Routers

Step 1 : Root your Android device first.

To root your android device click here

Step 2 : Download the Bcmon app and install.

Bcmon tool start Monitor Mode on your Broadcom chipset, which is so important for to crack the PIN.

To install Bcmon apk file on your android device, you will must allow the installation from unknown sources in your Security Menu.

Step 3 : Run the Bcmon app on your android device.

Run the Bcmon app after installing it. If the app is prompted, install the firmware tools. Tap on the “Enble Monitor Mode” option.

If app is not open properly or not respond or crash, then try it again. If its fails more than three times, then your device are mostly like not supported.

  • Your Device must be rooted for this trick.

Step 4 : Run Bcmon terminal

Running Bcmon terminal will launch the terminal like linux terminals. Now type airodump-ng wlan0 and press the Enter button.

Step 5 : Check and identify the access point you want to crack.

Now you see the list of available access points.now you have to select an access point which is using WEP encryption.

  • To know more about WEP encryption click here.

Step 6 : Note down the MAC address that appears.

These are the MAC address for the router. Make sure that you have to select right one if there are multiple router in the list.

Join this mac address down.

  • Also note the channel that the access point is broadcasting is on.

Step 7 : Scan the channel.

Before you start to crack password. you will need to make collect the information from that access point.

Now type airodump-ng -c channeL# – – bssid MAC address -w output ath0     and tap on the Enter. Airodump will starts scanning. Wait for some time while it scans information.

Note :  Be sure to plug it in if your battery getting low.

  • Replace the channel  with the channel number that access point is broadcasting on.
  • Replace MAC address with the MAC address of the router.
  • Keep scanning until you reach at least 20,000-30,000 packeets.

 

Step 8 : Cracking Password.

Once you have enough number of packets, you can start to crack the password.

Now return to the terminal and type aircrack-ng output*.cap and tap on the Enter.

Step 9 : Note down the Hexadecimal password when finished.

After finishing the cracking process the message Key Found ! will appear, fallowed by the key in the Hexadecimal manner.

Make sure that the  Probability is 100% OR key will not found.

Note : When you enter the key, enter it without the “_”.

Note : Cracking process could take several hours.

Hacking WiFi Passwords with Bcmon Android app using WPA2 WPS Routers

To proceed further for hacking WiFi passwords with Bcmon using WPA2 WPS Router do the starting Step 1, Step 2, Step 3 same as followed for  WEP Router.

Step 1: Download and install Reaver Application.

The application Reaver is developed for to crack WPS PIN in order to bypass or getting access on WPA2 passphrase

Note : To download Reaver application CLICK HERE.

Step 2 : Verify your settings.

Most of the time you will leave the settings that appear at the default setting. Make sure to checked the Automatic Advanced Settings

Step 3 : Start the cracking process.

Tap on Start Attack button at the bottom of the Reaver application setting menu. The monitor will open and will see the results of working crack process.

Note :  Cracking WPS process can take 2 to 10 OR more hours to complete, and its not successful every time. 

Leave a Reply